A sensitive, flat response condenser microphone ideal for acoustic instruments.

PG81-XLR includes a 15ft (4.57m) XLR to XLR Cable, Microphone Clip, 5/8" to 3/8" Thread Adapter, and a Storage Bag.

Features:
 • Flat frequency response is wide and uniform. Consistent sensitivity through frequency range
 • Cardioid polar pattern picks up the most sound from in front of the microphone and some sound from the
   sides. Less susceptible to feedback in high volume settings.
 • Condenser cartridge has a lightweight, sensitive diaphragm. Precisely and smoothly captures sound
   nuances.
 • Powered by AA battery or phantom power supply.
 • Internal shock mount for reduced handling noise
 • Durable metal construction.
 • On/off switch for onstage control.

Specifications:
 Type: Condenser (electret bias)
 Frequency Response: 40 to 18,000 Hz
 Polar Pattern: Cardioid (unidirectional), symmetrical about axis
 Output Impedance (at 1000 Hz): 600 ohms
 Sensitivity (at 1,000 Hz): -48 dBV/Pa, (4.0 mV), 1 Pascal = 94 dB SPL
 Electromagnetic Hum Sensitivity: -7 dB equivalent SPL in a 1 millioersted field (60 Hz)
 Switch: Built-in On/Off switch
 Recommended Input Load Impedance: 800 ohms minimum
 Output Clipping Level (1 kHz, 1 % THD): 2000 ohm load, 13 dBV (0.22 V) (phantom), -17 dBV (0.14 V) (battery)
 Maximum SPL: 2000 ohm load: 131 dB (phantom), 127 dB (battery)
 Self-Noise (Equivalent SPL): 20 dB typical, A-weighted
 Dynamic Range: (maximum SPL, 2k ohm load, to A-weighted noise level), 111 dB (phantom); 107 dB (battery)
 Signal-to-Noise Ratio: 68 dB (IEC 651)* at 94 dB SPL
 Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone
  output connector
 Connector: Three pin professional audio connector (male XLR type)
 Case: Steel and brass construction with black painted finish
 Net Weight: 250 g (8.8 oz)