The A-16II allows individual performers to create custom monitor mixes tailored to their individual needs. Designed for use in live performance or in the studio, the A-16II Personal Mixer gives each performer control over channel volume, grouping, pan, stereo spread, and master volume and tone. Every Personal Mixer in a system can create a unique monitor mix for a performer. Users can save and recall up to sixteen custom mixes as presets in their Personal Mixer.

The stereo output from the A-16II can be used to drive wired or wireless in-the-ear monitors, headphones, powered floor wedges, an amplifier, or spot monitors.

The A-16II Personal Mixer is fully compatible with all Pro16® Series products, including Aviom's digital interface card for Yamaha® digital mixing consoles. Support for Aviom monitor mixing is available in the form of console interface cards from an ever- increasing list of digital console manufacturers including Digidesign®, Soundcraft®, Innovason®, etc.

Mixers can be daisy-chained or connected in parallel using an A-Net Distributor. Parallel connections also allow power to be supplied to the mixers over the Cat-5e cable. As with all Pro16 Series products, Cat-5e cable runs of up to 500 feet (150 meters) are possible between devices, and there is no limit to the number of mixers in a system.

Features:
 • 16-channel stereo mixer
 • Fully adjustable pan per channel
 • Line/headphone audio output
 • Auto-detect mono/stereo circuitry
 • Simple set-up with Cat-5e cables
 • Sixteen Preset locations for storing custom mixes
 • Channel solo, mute, and group functions
 • Global trim for reducing all channel volumes
 • Sixteen channel select buttons with dual LEDs
 • Pan/Spread control with LED readout
 • Channel volume control with LED level readout
 • Master Volume, Treble, and Bass controls
 • Mounts easily on a mic stand with the optional MT-1 Mic Stand Mount

Specifications:
 Audio Output - 1/4-inch TRS stereo, headphone or line level  
 A-Net Input/Output - 1 A-Net input, 1 A-Net output; Category 5 (RJ45 connector)
 Digital to Analog Conversion Bit Depth - 24 bit 
 Signal to Noise Ratio - (Referenced to 0dB) -103dB
 Latency - <0.880 msec (measured from analog input to analog output)
 Pro16 A-Net - uses unshielded Cat-5e UTP (or better) cable; maximum 500ft (150m) between devices 
 Tone Controls - Treble +/-12dB at 9kHz shelving, Bass +/-12dB at 160Hz shelving
 Maximum Levels (RMS) - Line/Headphone outs: 1.0 watt at 100 ohms
 Impedance - Line/Headphone outs: 32 ohms
 Power Supply - External, DC, universal switching type
       Input Voltage - 100-240 volts, 50/60Hz, 30VA  
       Output Voltage - 18-24 VDC, 0.5 amp 
       Plug Size - 2 mm 
 Dimensions - 10.75" (273 mm) wide x 5.6" (142.2 mm) deep;  2.25" (57.5 mm) high 
 Weight - 3.4 lbs. (1.54 kg)